vi /etc/sysctl.conf
#如果该文件为空，则输入以下内容，否则请根据情况自己做调整：
# Controls source route verification
# Default should work for all interfaces
net.ipv4.conf.default.rp_filter = 1
# net.ipv4.conf.all.rp_filter = 1
# net.ipv4.conf.lo.rp_filter = 1
# net.ipv4.conf.eth0.rp_filter = 1
# Disables IP source routing
# Default should work for all interfaces
net.ipv4.conf.default.accept_source_route = 0
# net.ipv4.conf.all.accept_source_route = 0
# net.ipv4.conf.lo.accept_source_route = 0
# net.ipv4.conf.eth0.accept_source_route = 0
# Controls the System Request debugging functionality of the kernel
kernel.sysrq = 0
# Controls whether core dumps will append the PID to the core filename.
# Useful for debugging multi-threaded applications.
kernel.core_uses_pid = 1
# Increase maximum amount of memory allocated to shm
# Only uncomment if needed!
# kernel.shmmax = 67108864
# Disable ICMP Redirect Acceptance
# Default should work for all interfaces
net.ipv4.conf.default.accept_redirects = 0
# net.ipv4.conf.all.accept_redirects = 0
# net.ipv4.conf.lo.accept_redirects = 0
# net.ipv4.conf.eth0.accept_redirects = 0
# Enable Log Spoofed Packets, Source Routed Packets, Redirect Packets
# Default should work for all interfaces
net.ipv4.conf.default.log_martians = 1
# net.ipv4.conf.all.log_martians = 1
# net.ipv4.conf.lo.log_martians = 1
# net.ipv4.conf.eth0.log_martians = 1
# Decrease the time default value for tcp_fin_timeout connection
net.ipv4.tcp_fin_timeout = 25
# Decrease the time default value for tcp_keepalive_time connection
net.ipv4.tcp_keepalive_time = 1200
# Turn on the tcp_window_scaling
net.ipv4.tcp_window_scaling = 1
# Turn on the tcp_sack
net.ipv4.tcp_sack = 1
# tcp_fack should be on because of sack
net.ipv4.tcp_fack = 1
# Turn on the tcp_timestamps
net.ipv4.tcp_timestamps = 1
# Enable TCP SYN Cookie Protection
net.ipv4.tcp_syncookies = 1
# Enable ignoring broadcasts request
net.ipv4.icmp_echo_ignore_broadcasts = 1
# Enable bad error message Protection
net.ipv4.icmp_ignore_bogus_error_responses = 1
# Make more local ports available
# net.ipv4.ip_local_port_range = 1024 65000
# Set TCP Re-Ordering value in kernel to ‘5′
net.ipv4.tcp_reordering = 5
# Lower syn retry rates
net.ipv4.tcp_synack_retries = 2
net.ipv4.tcp_syn_retries = 3
# Set Max SYN Backlog to ‘2048′
net.ipv4.tcp_max_syn_backlog = 2048
# Various Settings
net.core.netdev_max_backlog = 1024
# Increase the maximum number of skb-heads to be cached
net.core.hot_list_length = 256
# Increase the tcp-time-wait buckets pool size
net.ipv4.tcp_max_tw_buckets = 360000
# This will increase the amount of memory available for socket input/output queues
net.core.rmem_default = 65535
net.core.rmem_max = 8388608
net.ipv4.tcp_rmem = 4096 87380 8388608
net.core.wmem_default = 65535
net.core.wmem_max = 8388608
net.ipv4.tcp_wmem = 4096 65535 8388608
net.ipv4.tcp_mem = 8388608 8388608 8388608
net.core.optmem_max = 40960
如果希望屏蔽别人 ping 你的主机，则加入以下代码：
# Disable ping requests
net.ipv4.icmp_echo_ignore_all = 1
编辑完成后，请执行以下命令使变动立即生效：
/sbin/sysctl -p
/sbin/sysctl -w net.ipv4.route.flush=1
例
net.ipv4.tcp_fin_timeout = 30
net.ipv4.tcp_max_syn_backlog = 10240
net.ipv4.tcp_keepalive_time = 1800
net.ipv4.tcp_synack_retries = 3
net.ipv4.tcp_syn_retries = 3
net.ipv4.tcp_max_orphans = 81920
net.ipv4.tcp_max_tw_buckets = 38000
net.ipv4.tcp_window_scaling = 0
net.ipv4.tcp_sack = 0
net.ipv4.tcp_timestamps = 0
net.ipv4.tcp_syncookies = 1
